Installing my sensor:

  • Power the device on by pressing and holding the centre button for 10 seconds
  • 2 flashes of the green light means sensor is now on
  • Ensure the installation area is clean
  • Place sensor on the bucket, behind the cabin where the bucket will lift the highest, as shown below
  • The sensor should be on the exterior of the bucket, if placed on the interior the data may not transmit or the device may be damaged
  • When attaching, ensure that the MachineMax logo is facing the installer, with logo at the top of the device
  • After installation the device can take up to 30 minutes to register it's orientation for correct data transmission
Download install guide